| Number of Batteries | 1 AA batteries required. |
|---|---|
| Brand | Kastar |
| Battery Cell Composition | NiMH |
| Recommended Uses For Product | Shaver |
| Unit Count | 1 Count |
| Model Number | 4330206888 |
| Model Name | AA2 4V 2000mAh |
| UPC | 636790620038 |
| Manufacturer | Kastar |
| Warranty Description | 18-Month |
| Voltage | 1.2 volts |
| Reusability | Rechargeable |
| Compatible Phone Models | Norelco Models: 282XL, 300SX, 400DX 605RX, 825RX, 835RX, 875RX, 885RX, 905RX 915RX, 945RX, 955RX, 965RX, 985RX 3801XL, 3805XL, 4805XL, 4805XL, 4821XL, 4825XL 4845XL, 4865XL, 4885XL, 5655X, 5615X, 5616X 5801XL, 5802XL, 5821XL, 5822XL, 5825XL, 5845XL 5842XL, 5841XL, 5848XL, 5849XL, 5861XL, 5862XL, 5863XL 5864XL, 5865XL, 5867XL, 5885XL, 5886XL, 5887XL 5655X, 6701X, 6705X, 6706X, 6709X, 6735X, 6737X, 6756X 6826XL, 6828XL, 6829XL, 6846XL, 6863XL, 6865XL 6866XL, 6867XL, 6885XL, 6886XL, 6887XL, 7610X, 7616X 7617X, 7735X, 7737X, 7745X, 7775X, 7825XL, 7845XL 7864XL, 7865XL, 7866XL, 7885XL, 7886XL, 8825XL 8845XL, 8865XL, 8867XL T-990, T-980 Beard Trimmer Fits Remington Models: XLR3000, 5BF1 Fits Wahl 9918C |
| Battery Weight | 2.4 ounces |
| Item Dimensions | 1.98 x 1.13 x 0.57 inches |
| Antenna Location | Shaver |
| Battery Cell Type | NiMH |
| GTIN | 636790620038 |
As dúvidas que mais recebemos sobre compra, prazo e impostos.
Sim — original, novo e lacrado. Sem exceção.
Compramos direto das marcas, de distribuidores autorizados e de grandes varejistas dos Estados Unidos. Cada item é recebido, conferido e separado no nosso próprio centro de distribuição na Flórida antes de embarcar para o Brasil.
Não trabalhamos com réplicas, recondicionados ou fornecedores sem procedência — e é por isso que conseguimos garantir a origem de cada unidade que sai daqui.
Vem. E não existe outra origem possível: não mantemos estoque no Brasil.
Seu pedido sai do nosso centro de distribuição próprio em Margate, na Flórida, onde é conferido, embalado com proteção reforçada para o transporte internacional e despachado para o endereço informado na compra.
Sem intermediário, sem revenda no meio do caminho: da prateleira americana direto para a sua casa.
O prazo exato do seu CEP aparece no carrinho e no checkout, antes de você pagar.
Na média, a entrega acontece em 7 a 12 dias úteis após a aprovação do pagamento, divididos assim:
Nada de “aguarde 60 dias”. Você compra sabendo a data e acompanha cada etapa pelo rastreio.
Não. O preço que você vê na tela é o preço final.
Todos os tributos e encargos de importação já estão incluídos no valor da compra. Nós recolhemos, nós cuidamos do desembaraço — você não precisa fazer absolutamente nada.
Importante: se você receber SMS, e-mail ou mensagem pedindo pagamento de imposto para liberar a encomenda, ignore e não pague. A quitação é feita automaticamente pela nossa operação. Pagamentos por fora geram duplicidade e atrasam a liberação do seu pedido.
Frete grátis para todo o Brasil, sem valor mínimo de compra.
O valor que aparece no produto é o que você paga: sem frete na finalização, sem taxa de importação na entrega, sem surpresa.
No mesmo dia em que o pagamento é aprovado, ele entra na fila de separação.
A preparação e a expedição na Flórida levam, normalmente, de 1 a 3 dias úteis. Alguns itens podem exigir um tempo maior de reposição nos Estados Unidos — e, mesmo nesses casos, o prazo final de entrega informado na sua compra continua valendo.
Sim, do depósito na Flórida até a sua porta.
Assim que o pedido é postado, você recebe o código e o link de rastreamento por e-mail e WhatsApp. Também dá para consultar a qualquer momento na nossa página de rastreamento, usando e-mail, CPF ou número do pedido, ou em Minha Conta → Meus Pedidos.
A primeira movimentação pode levar até 48 horas para aparecer no sistema — é o intervalo normal entre a postagem física e a atualização do rastreio.
Sim. Nosso catálogo é atualizado diariamente com o estoque real nos Estados Unidos.
Se, em uma situação excepcional, o item ficar indisponível depois da sua compra, nossa equipe entra em contato em até 24 horas úteis com as alternativas — produto equivalente ou reembolso integral, o que você preferir.
Em nenhum cenário você fica sem resposta e sem o seu dinheiro.
É, e dá para verificar.
A Cosmetic Store é uma loja credenciada da rede ShopEx (ShopEx Global Operations LLC), empresa de e-commerce internacional que opera desde 2024 e responde por toda a operação logística dos pedidos — da compra nos Estados Unidos até a entrega no Brasil.
São milhares de encomendas já despachadas do centro de distribuição próprio da ShopEx, em 1856 NW 54th Ave, Margate, FL 33063, Estados Unidos. Endereço real, operação real, conferível.
No pagamento: ambiente criptografado (SSL), processado por gateway certificado PCI DSS. Os dados do seu cartão nunca ficam armazenados em nossos servidores. Pague com Pix ou em até 6x sem juros no cartão.
A gente resolve — e o custo é nosso.
Você tem 7 dias corridos após o recebimento para solicitar troca, devolução ou reembolso. Basta entrar em contato com o número do pedido e, se for o caso, fotos do item e da embalagem.
Analisamos em até 24 horas úteis e, quando a devolução é aprovada, enviamos um código de postagem gratuito: você não paga logística reversa. O estorno é feito na mesma forma de pagamento da compra.
Comprar aqui não te expõe a risco nenhum. O risco é nosso.
Porque a parte difícil da importação já está resolvida.
Importando sozinho, você garimpa fornecedor, paga em dólar com IOF, contrata frete internacional, torce para o site americano aceitar seu cartão, acompanha o desembaraço e paga o imposto de importação depois — sem saber o valor final até a conta chegar.
Aqui, você paga em reais, com o valor total fechado na tela, e nós assumimos cada etapa: compra na origem, conferência e embalagem no nosso centro de distribuição na Flórida, envio internacional, desembaraço, entrega no Brasil e suporte em português até a encomenda estar na sua mão.
O mesmo produto original. Sem o trabalho, sem o risco e sem a surpresa no final.
qUeRtYu (comprador verificado) –
Works Great in my ManGroomer
I was appalled at the battery failure in my ManGroomer after only about a year. I pried it apart, and further disassembled it to get to the batteries. I inspected the dead batteries, and ordered these as a replacement set.These batteries came with long enough tabs that I was able to easily orient the battery correctly (Positive on the correct side) and then solder the connection to old tabs which I cut with scissors. It took less than 5 minutes to make the connection, and then a few minutes more to re-assemble the shaver. Another throw-away item saved from the land-fill!
Niraj Jain (comprador verificado) –
Perfect replacement for my cordless rechargeable Water-Pik travel gizmo
The water pik cordless version is real handy when I am travelling, but it was not holding a charge anymore. It was a little tricky to open the unit and get at the batteries inside, but basically required a little bit of manipulation after opening the screws. To replace the batteries, you do need to be handy with a soldering iron to remove the existing batteries and connect in the new ones; these batteries come with tabs (but not pigtails) so you cannot connect them by just twisting wires together. Other than that, it was pretty straightforward.
KELVIN (comprador verificado) –
These are NOT NiCD batteries, so don’t advertise these as NICD replacements!!!!
These batteries are Ni-MH batteries that won’t work with my vintage Norelco shaver (The picture shows that they are NI-MH batteries, so partially my error not looking closely enough to the picture). In the product description, it says these can replace 1.2 volt AA NiCD batteries 1000mAh or less. This is wrong since my Norelco shaver was designed for NiCD batteries , and will not charge NI-MH properly.For the price, it wasn’t worth my effort to complain to the Seller about this. This was the first time I tried non Panasonic NiCD batterie for my shaver. I have gotten 4 to 5 years of life out of genuine Panasonic NiCD batteries (my shaver is 25 years old) , so it was stupid of me to try some “cheaper” brand.
Kaiser Soze (comprador verificado) –
It may be better to get two individual batteries with tabs
These two batteries are connected in series via a shard tab at one end. This may or may not be ideal for you, depending on whether this is how the original or existing batteries are situated in the shaver you are repairing. If the shaver you are refurbishing has batteries with individual tabs and the four individual tabs are soldered into the circuit board at four individual points, this will not be the best solution for you. In this case, you want to purchase two individual batteries that each have tabs at both ends, so that you can solder them to the board separately.The shaver I refurbished is a Braun 7526. Even though the batteries are in fact connected in series, they are individually soldered to the circuit board, onto separate solder pads which are electrically connected on the circuit board via a lump of solder. When I ordered this pair of batteries, I did not notice that they were joined in series at one end, and even though I searched, Amazon did not show me any alternatives for individual batteries each with tabs at both ends. Or maybe Amazon did show me alternatives and I didn’t notice. In any case this wasn’t the best option for me, it turns out.Even if the two batteries in a shaver appear to be wired in series, in order to be absolutely certain, in the case where the batteries are so far gone that they won’t take any charge at all, you have to closely inspect the circuit board and check the resistance, using a meter, between the two solder pads at one end. Obviously if the two batteries are individually soldered to the board, you have to figure out which end, on the circuit board, is the end where they are joined on the circuit board. And there is always the possibility that even though they are wired in series, there could be another connected on the circuit board whereby half of the total series voltage is taken for some purpose. This probably is very unlikely, but it is nevertheless a possibility that you have to rule out by close inspection of the board.It turned out, in my case, that the end where the two batteries are connected in series via the circuit board is the end furthest from the shaving head and adjacent to the opening where the charging cord connects. It was necessary for me to figure this out, by inspecting the board and confirming with the Ohmmeter, in order that I would know which of the two original solder pads to use and which pair I would not have to bother with. But now the problem was that when I oriented this battery pack so that the ends with the exposed tabs were are the correct end of the board, i.e., the end where the two solder pads are not electrically connected via the board, the polarity was wrong. This left me with two options. One approach would be to separate the two batteries buy snipping the tab that joined them at one end, in which case I would need to solder a wire to each half of that tab, so that I could connect both batteries to the circuit board at that end. In this case, I would simply swap the positions of the two batteries, in order to correct the polarity. The other option was to flip the dual battery pack over. Not rotate it end by end, but flip it the other way, so as to cause the two tabs to point up instead of down toward the circuit board. This would mean that I would have to solder wires to the two tabs and then carefully fold them so that the attached wires would point down into the circuit board. This is what I decided to do, but it was a risky endeavor because those tabs are fragile and are not meant to be folded over. I could easily have broken one of them.I used some 24 gauge single strand wire. A finer gauge would have been better, but 24 gauge was the finest gauge I had on hand. In hindsight, it would have been better to strip a piece of multi-strand wire where the individual strands are a gauge slightly finer than 24 gauge. Obviously you want the wire to extend in the same direction as the tabs, so that when you fold the tabs, the wires will extend in the correct direction. I did it in a way whereby I needed to fold the wire along with the tab, which I thought would give the tabs a little extra strength at the fold. It turned out that this was a good idea. Obviously you do this before you solder, i.e., you stick the little wire into the little hole in the tab and fold it over and hold the thing in place using a piece of painter’s masking tape before you apply the solder.On the cover half that goes down onto the batteries, there is a part that sort of captures the ends of the batteries to help hold them in place. You need to check and make sure that this does not collide with the tabs before you solder the thing to the board. I put a little piece of thin double-sided tape on the board at the end that wouldn’t get soldered down. I also stuck a carefully cut small piece of gorilla tape over the end with the tabs which now had wires soldered to them, in order to insure that they would not make contact with other, exposed electrical contacts at the rear of the motor and very, very close to that end of the batteries with the exposed tabs with the wires now soldered to them.Because I did this without rushing and thought each step through carefully before I did anything, it went without a hitch and I now have a good-as-new Braun 7526. But it would have been easier and less risky if I had used two independent batteries each with open tabs at both ends.
Roseberry Raymond (comprador verificado) –
Remplacement identique à celui d’origine.
Comme commander et avec Amazon et intercom, toujours satisfait du délai.👍
Mr Stephen W Taylor (comprador verificado) –
Easy to fit
Purchased this item to replace defective cells in shaver.Item easy to fit, as it has a link at one end and soldertags for the positive and negative terminals.Charged up and running well.
g p (comprador verificado) –
Old shaver like new
Old shaver like new. needs soldering
kellyinontario (comprador verificado) –
Good battery
good replacement
John Lee (comprador verificado) –
Great way to make your shaver operate again.
Easy to replace the old batteries in my shaver. These worked better than the original. You will need a soldering iron to make permanent connections.
V. Donella (comprador verificado) –
Buy a battery; save a tool!
Worked great to restore my cordless hair trimmer to life, replacing its aged NiCd cells and keeping an otherwise fine tool out of the landfill.
Always Gomes (comprador verificado) –
Shaver Replacment Batteries
Works perfectly
F J Linkous (comprador verificado) –
Nice package at an affordable price
Direct fit for Nicads I removed from my equipment. Charging voltage matched as well.
AV8er (comprador verificado) –
Decent enough
Ok, never got to use em for my particular need.