SH90 Replacement Heads Compatible with Philips Norelco Series 9000 & S8000
Sobre este item
- PRECISE FIT GUARANTEE: This upgraded replacement head Compatible with Philips Norelco shavers across three series – S9000, S8000, and S7000. Popular models include S7310, S7340, S7530, S7740, S7950, S7980, and other S7xxx variants. Same exact fit as the standard version – just built tougher inside.
- REINFORCED METAL BUCKLE: Durable Design That Lasts Upgraded with a robust all-metal wheel buckle to replace fragile plastic parts. This reinforced mechanism withstands daily use, securing the head firmly in place and putting an end to the hassle of loose or breaking latches.
- SH90-GRADE DUAL-PRECISION SYSTEM: Thicker Blades for Longer-Lasting Sharpness.Features an SH90-grade dual-precision cutting system with double-thick blades. This superior construction enhances lift-and-cut efficiency, significantly reduces skin tugging, and maintains a sharp edge far longer than standard replacements.
- Built for Guys Who Shave Every Morning:Frequent use wears out standard heads fast. This upgraded version is designed for consistent, daily shavers who need their equipment to keep up.
- SNAP-IN INSTALLATION : Easy Setup with Total Peace of Mind.Enjoy tool-free, snap-in installation in seconds. Replace every 12–18 months depending on your shaving habits.
Descrição
Especificações
| Package Dimensions | 6.14 x 4.29 x 2.17 inches; 1.76 ounces |
|---|---|
| Manufacturer | FAIRBEE |
Avaliações
Avaliar este produto
Perguntas frequentes
As dúvidas que mais recebemos sobre compra, prazo e impostos.
O produto é original?
Sim — original, novo e lacrado. Sem exceção.
Compramos direto das marcas, de distribuidores autorizados e de grandes varejistas dos Estados Unidos. Cada item é recebido, conferido e separado no nosso próprio centro de distribuição na Flórida antes de embarcar para o Brasil.
Não trabalhamos com réplicas, recondicionados ou fornecedores sem procedência — e é por isso que conseguimos garantir a origem de cada unidade que sai daqui.
O produto vem mesmo dos Estados Unidos?
Vem. E não existe outra origem possível: não mantemos estoque no Brasil.
Seu pedido sai do nosso centro de distribuição próprio em Margate, na Flórida, onde é conferido, embalado com proteção reforçada para o transporte internacional e despachado para o endereço informado na compra.
Sem intermediário, sem revenda no meio do caminho: da prateleira americana direto para a sua casa.
Em quanto tempo eu recebo?
O prazo exato do seu CEP aparece no carrinho e no checkout, antes de você pagar.
Na média, a entrega acontece em 7 a 12 dias úteis após a aprovação do pagamento, divididos assim:
- 1 a 3 dias úteis — separação e embalagem na Flórida
- 1 a 3 dias úteis — transporte internacional EUA → Brasil
- 3 a 7 dias úteis — desembaraço e entrega pelo transportador local
Nada de “aguarde 60 dias”. Você compra sabendo a data e acompanha cada etapa pelo rastreio.
Vou pagar imposto ou alguma taxa quando o produto chegar?
Não. O preço que você vê na tela é o preço final.
Todos os tributos e encargos de importação já estão incluídos no valor da compra. Nós recolhemos, nós cuidamos do desembaraço — você não precisa fazer absolutamente nada.
Importante: se você receber SMS, e-mail ou mensagem pedindo pagamento de imposto para liberar a encomenda, ignore e não pague. A quitação é feita automaticamente pela nossa operação. Pagamentos por fora geram duplicidade e atrasam a liberação do seu pedido.
Quanto custa o frete?
Frete grátis para todo o Brasil, sem valor mínimo de compra.
O valor que aparece no produto é o que você paga: sem frete na finalização, sem taxa de importação na entrega, sem surpresa.
Quando meu pedido é enviado?
No mesmo dia em que o pagamento é aprovado, ele entra na fila de separação.
A preparação e a expedição na Flórida levam, normalmente, de 1 a 3 dias úteis. Alguns itens podem exigir um tempo maior de reposição nos Estados Unidos — e, mesmo nesses casos, o prazo final de entrega informado na sua compra continua valendo.
Consigo acompanhar a entrega?
Sim, do depósito na Flórida até a sua porta.
Assim que o pedido é postado, você recebe o código e o link de rastreamento por e-mail e WhatsApp. Também dá para consultar a qualquer momento na nossa página de rastreamento, usando e-mail, CPF ou número do pedido, ou em Minha Conta → Meus Pedidos.
A primeira movimentação pode levar até 48 horas para aparecer no sistema — é o intervalo normal entre a postagem física e a atualização do rastreio.
Esse produto está mesmo disponível?
Sim. Nosso catálogo é atualizado diariamente com o estoque real nos Estados Unidos.
Se, em uma situação excepcional, o item ficar indisponível depois da sua compra, nossa equipe entra em contato em até 24 horas úteis com as alternativas — produto equivalente ou reembolso integral, o que você preferir.
Em nenhum cenário você fica sem resposta e sem o seu dinheiro.
Comprar aqui é seguro?
É, e dá para verificar.
A Cosmetic Store é uma loja credenciada da rede ShopEx (ShopEx Global Operations LLC), empresa de e-commerce internacional que opera desde 2024 e responde por toda a operação logística dos pedidos — da compra nos Estados Unidos até a entrega no Brasil.
São milhares de encomendas já despachadas do centro de distribuição próprio da ShopEx, em 1856 NW 54th Ave, Margate, FL 33063, Estados Unidos. Endereço real, operação real, conferível.
No pagamento: ambiente criptografado (SSL), processado por gateway certificado PCI DSS. Os dados do seu cartão nunca ficam armazenados em nossos servidores. Pague com Pix ou em até 6x sem juros no cartão.
E se o produto chegar errado, avariado ou não for o que eu esperava?
A gente resolve — e o custo é nosso.
Você tem 7 dias corridos após o recebimento para solicitar troca, devolução ou reembolso. Basta entrar em contato com o número do pedido e, se for o caso, fotos do item e da embalagem.
Analisamos em até 24 horas úteis e, quando a devolução é aprovada, enviamos um código de postagem gratuito: você não paga logística reversa. O estorno é feito na mesma forma de pagamento da compra.
Comprar aqui não te expõe a risco nenhum. O risco é nosso.
Por que comprar aqui em vez de importar por conta própria?
Porque a parte difícil da importação já está resolvida.
Importando sozinho, você garimpa fornecedor, paga em dólar com IOF, contrata frete internacional, torce para o site americano aceitar seu cartão, acompanha o desembaraço e paga o imposto de importação depois — sem saber o valor final até a conta chegar.
Aqui, você paga em reais, com o valor total fechado na tela, e nós assumimos cada etapa: compra na origem, conferência e embalagem no nosso centro de distribuição na Flórida, envio internacional, desembaraço, entrega no Brasil e suporte em português até a encomenda estar na sua mão.
O mesmo produto original. Sem o trabalho, sem o risco e sem a surpresa no final.


Amazon Customer –
Fits correctly, but worse shaving experience
I’m comparing this replacement against a manufacturer original SH90 head that’s several years old. I don’t know how old exactly, but I know that it’s either the original from my Series 9000 shaver or a manufacturer original replacement I ordered within a year or so after purchase due to not liking the shaving experience. (It turned out, the SH90 head just always exhibits more pulling than previous Norelco shaver heads, and I’m not sure which SH90 I left attached to my shaver afterwards.)There are some physical differences between this replacement and the Philips original. My original has orange retaining rings for the blades on the top half, while this Fairbee replacement has light blue or grey rings. I found that while the overall appearance is very similar aside from the color, the top halves and bottom halves do not fit if mixed. For clarity, each of these heads is composed of two halves that snap together:- A top half contains the three rotary blades- A bottom half connects to the shaver and has rotating elements that fit into slots at the center of each rotary bladeWhile I couldn’t see any noticeable difference in shape with the naked eye, I was unable to get the Fairbee top to fit onto the Philips bottom, or the Philips top on the Fairbee bottom.Relatedly, the product description’s mention of an upgraded metal bearing on the bottom half vs a plastic pivot on the original doesn’t seem to hold true on my original SH90. That is, both bottom halves look like the “metal bearing” picture and not the “plastic pivot” picture. It’s possible the comparison is against a different compatible head, rather than the SH90 head that came with my Series 9000 shaver.When activated, even with just the bottom half attached and the top half left off, the Fairbee rotation produces a higher pitched noise. I’m not sure if this is simply due to wear on my older Philips unit, or if something about the motion in the Fairbee replacement is creating a different quality of noise. I also noticed that it’s possible to insert the Fairbee unit misaligned, and when this happens, the top half blades will exhibit noticeable rattling. When aligned properly, they sound similar to the Philips unit aside from the slightly higher pitched noise.In actual use, I found the Fairbee head to pull at my hairs more than the Philips head. Granted, I recall frustration with the SH90 even with fresh new heads years in the past, so it’s possible my current Philips head has simply worn down over time and the wear and tear managed to make it pull less. Shaving was otherwise not very different, and I still prefer linear motor shavers over modern Philips shavers for a clean, non-pulling shave.I wouldn’t recommend this replacement over a standard Philips replacement primarily due to the slight fit differences (with the rattling from a misaligned fit that I almost never see with Philips replacements), and can’t say for sure whether the noise difference and amount of pulling would change over time. Mostly because my memories of new Philips SH90 heads back when the Series 9000 shavers were new are of them being rather unpleasant to use in general. But if you really need a replacement and the Philips head is much more expensive at the time you need it, I could see this being a reasonable temporary option, or maybe a permanent one if it settles down to being the same as a years-old Philips SH90 after some breaking in. I’m writing this review after only two days or so of use, so it’s still very much new.
Molley –
Looks like a quality replacement
Well, I guess I need glasses… I got this replacement head for my husband’s Norelco shaver as the old one has become dull. Unfortunately, I misread the series number on the shaver, thinking it was a S8000, however it’s an older S6000, so this replacement doesn’t fit. However, looking at this replacement, it seems to be constructed well, the head is solid, and the overall weigh is good, plus the size of the head is quite large and the wheel buckle is all metal reinforced, much better than what I see on the older version, which have a lot of plastic. The replacement seems to have a sturdy area for snapping the head onto the shaver body too.
Rocket Rob –
Does not work well with my razor
Excellent price for a replacement head, compared to brand name product, and looks almost identical. If you compare the individual circular blade components, you can see that there is a difference in the number of tiny blades in the rotation by a few – so not, technically, identical but very close. Be sure to double check your product number with the listing info to ensure compatibility – this SH90 Replacement Head says it is compatible with Philips Norelco Series 9000 & S8000 but it does NOT play nicely with my Philips Norelco S8950 model. Pulling the entire head unit off and replacing it with this N90 one is successful and things fire up as usual but, during use, it becomes obvious that the unit is struggling to work smoothly. Sounds as though it is slipping at times, the gears not quite making contact like they should – especially when the head is tilted or tackling a curve. Something is just off enough to make this almost work, but fall short in the end. My S8950 is not the newest model available so perhaps it has just outlived its ability to be updated? Oh, and I thought that I could salvage the individual round razor units and put the new ones inside my current shaving head but there is enough of a difference in the two parts that they just won’t click in place, unfortunately. Keep all of your packaging in case you have to return this item. Hopefully, you will have better luck with your non-S8950 razor. This seems like a solid product, just not the right one for my needs.
Texan (comprador verificado) –
Avoid this product!
Avoid this product. It is a cheap imitation which has poor quality. The blades pull your skin so is uncomfortable to use. Additionally, it produces a poor shave and cannot create a close shave.I returned mine and went back to the formershaving heads I was replacing. They produced a better shave!
Night Train Lane –
Easy swap, smooth shave, and a great way to extend the life of the shaver
Great Way to Refresh an Older NorelcoI picked these up because my Philips Norelco was starting to remind me that shaving heads don’t live forever. Instead of replacing the entire shaver, I decided to replace the heads, and I’m glad I did.Installation was quick and straightforward. The replacement heads fit nicely and were easy to swap out without needing any special tools or an engineering degree. Once installed, the shaver immediately felt like it had gotten a little makeover.The shave is smooth and comfortable, and the heads do a good job picking up short stubble. I noticed a definite improvement compared with my older, worn-out heads, especially when going over areas that previously required several passes.I also appreciate that replacing the heads is much more economical than buying a completely new electric shaver when the motor and everything else are still working perfectly.Overall, these were easy to install, comfortable to use, and gave my Norelco a fresh start.Easy swap, smooth shave, and a great way to extend the life of the shaver.
anna –
Good value good performance shaves the face quite well.
I ordered this replacement head specifically for a s8000 shaver. The replacement heading blades are pretty good quality and do the job that they’re designed to do. The fit and finish both on the blade and head fit well into the shaver. The performance is on par with the original equipment blades and head.Looking at the value for the money these are very well priced for a replacement components. I was looking to purchase the original equipment replacement blades and head for my s8000 but after looking at the car that I decided to go in the non OEM direction.So far I’ve shaved three total times both for about 3 to 5 minutes and a new replacement unit appears to be pretty good quality and works well. So far I haven’t experience skin irritation or any burning marks or burning areas on the skin. I would definitely purchase again when preparing fit and finish plus value.
Chris A –
Good Replacement for the Older SH90 Shaver Head
I bought this shaver head because my current one has been in use for more than a year, so I figured it was time for a replacement.One thing to note before buying: this is the SH90 version, which is the older design. Philips has replaced it with the newer SH91, which I think is a better design. The SH91 is easier to clean, and you can replace the individual shaving parts without replacing the entire head assembly.As far as the quality of this SH90 goes, it appears to be just as good as the genuine SH90 I have used previously. I’ve seen some people mention that these are louder, but I don’t notice much difference compared with the SH91 I am currently using.The actual shaving performance seems very similar as well. I don’t have particularly tough or coarse beard hair, though, so your experience may be different.I haven’t had it long enough to say anything about long-term durability or how long the replacement heads will last. I’ll update the review if anything changes.You can see the differences between the SH90 and SH91 versions in the attached picture. I also like that this one comes with a protective cover, which is useful. My plan is to keep this one as a backup, especially for traveling, in case something happens to my primary shaver head.For now, I think this is a good value. If you’re currently using an SH90 and are happy with it, this is a good replacement option. Just be aware that the SH91 is the newer design and may be worth considering if you’re looking for the latest version.
D. Nelson (comprador verificado) –
Cheap blades. Get what you pay for.
Inferior product. Significantly less blades. This is a cheap replacement. I’m going to try and send it back for a refund. I’ll look for OEM replacement blades.